Sportbike Rider Picture Website
|More Information on the Honda CBR1000RR|
The CBR1000RR, marketed in some countries as the "Fireblade", is a 998 cc (60.9 cu in) liquid-cooled inline four-cylinder sportbike, introduced by Honda in 2004 as the 7th generation of the CBR series of motorcycles that began with the CBR900RR in 1992.
The Honda CBR1000RR was developed by the same team that was behind the MotoGP series. Many of the new technologies introduced in the Honda CBR600RR, a direct descendant of the RC211V, were used in the new CBR1000RR such as a lengthy swingarm, Unit Pro-Link rear suspension, and Dual Stage Fuel Injection System (DSFI).
The seventh-generation RR, the Honda CBR1000RR, was the successor to the 2002-03 CBR954RR. While evolving the CBR954RR design, few parts were carried over to the CBR1000RR. The compact 998 cc (60.9 cu in) in-line four was a new design, with different bore and stroke dimensions, race-inspired cassette-type six-speed gearbox, all-new ECU-controlled ram-air system, dual-stage fuel injection, and center-up exhaust with a new computer-controlled butterfly valve. The chassis was likewise all-new, including an organic-style aluminum frame composed of Gravity Die-Cast main sections and Fine Die-Cast steering head structure, inverted fork, Unit Pro-Link rear suspension, radial-mounted front brakes, and a centrally located fuel tank hidden under a faux cover. Additionally, the Honda Electronic Steering Damper (HESD) debuted as an industry first system which aimed to improve stability and help eliminate head shake while automatically adjusting for high and low speed steering effort.
A longer swingarm acted as a longer lever arm in the rear suspension for superior traction under acceleration and more progressive suspension action. Longer than the corresponding unit on the CBR954RR (585 mm (23.0 in) compared to 551 mm (21.7 in)) the CBR1000RR's 34 mm (1.3 in) longer swingarm made up 41.6 percent of its total wheelbase. The CBR1000RR's wheelbase also increased, measuring 1,405 mm (55.3 in); a 5 mm (0.20 in) increase over the 954.
Accommodating the longer swingarm was another reason the CBR1000RR power plant shared nothing with the 954. Shortening the engine compared to the 954 meant rejecting the conventional in-line layout. Instead, engineers positioned the CBR1000RR's crankshaft, main shaft and countershaft in a triangulated configuration, with the countershaft located below the main shaft, dramatically shortening the engine front to back, and moving the swingarm pivot closer to the crankshaft. This configuration was first successfully introduced by Yamaha with the YZF-R1 model in 1998 and inspired superbike design in the following years.
Positioning this compact engine farther forward in the chassis also increased front-end weight bias, an effective method of making high-powered liter bikes less wheelie prone under hard acceleration. This approach, however, also provided very little space between the engine and front wheel for a large radiator. Engineers solved this problem by giving the RR a modest cylinder incline of 28°, and moving the oil filter from its frontal placement on the 954 to the right side of the 1000RR engine. This allowed the RR's center-up exhaust system to tuck closely to the engine.
The eighth generation RR was introduced in 2006 and offered incremental advancements over the earlier model with more power, better handling and less weight making it faster than it's rival the 04-06 Yamaha r1. Changes for 2006 included:
The 2006 model carried over to the 2007 model year mostly unchanged except for color options.
An all-new ninth-generation RR, the CBR1000RR was introduced at the Paris International Motorcycle Show on September 28, 2007 for the 2008 model year. The CBR1000RR was powered by an all-new 999 cc (61.0 cu in) inline-four engine with a redline of 13,000 rpm. It had titanium valves and an enlarged bore with a corresponding reduced stroke. The engine had a completely new cylinder block, head configuration, and crankcase with lighter pistons. A new ECU had two separate revised maps sending the fuel and air mixture to be squeezed tight by the 12.3:1 compression ratio. Ram air was fed to an enlarged air box through two revised front scoops located under the headlamps. Honda claimed power output to be at least 115 kW (154 hp) at 12,000 rpm.
Honda made a very focused effort to reduce and centralize overall weight. A lighter, narrower die-cast frame was formed using a new technique which Honda claimed allowed for very thin wall construction and only four castings to be welded together. Almost every part of the new bike was reengineered to reduce weight, including the sidestand, front brake hoses, brake rotors, battery, and wheels.
In order to improve stability under deceleration, a slipper clutch was added, with a center-cam-assist mechanism. The Honda Electronic Steering Damper was revised as well. Another significant change was the exhaust system, which was no longer a center-up underseat design. The new exhaust was a side-slung design in order to increase mass centralization and compactness while mimicking a MotoGP-style.
On September 5, 2008, Honda announced the tenth generation of the RR as a 2009 model. The bike remained much the same, in terms of engine, styling, and performance. The only significant addition was the introduction of the optional factory fitted Combined ABS (C-ABS) system originally showcased on the CBR600RR Combined ABS prototype. New, lightweight turn signals were also added.
On September 4, 2009, Honda announced the eleventh generation of the RR as a 2010 model. Honda increased the diameter of the flywheel for more inertia. This improved low-rpm torque and smoother running just off idle. The license plate assembly was redesigned for quicker removal when preparing the motorcycle for track use. The muffler cover was also redesigned for improved appearance.
The twelfth-generation Fireblade celebrated its 20th anniversary, revised for 2012, featuring Showa's Big Piston suspension technology, further improved software for the combined ABS, new 12-spoke wheels, aerodynamic tweaks, an all LCD display and other minor updates.
Retuned engine for additional power, modified rider position along with new windscreen. Also added a performance oriented "SP" variant.
For 2017, with the 25th anniversary of the Fireblade, Honda has updated its flagship CBR with new features such as throttle-by-wire and traction control for the first time that works with selectable ride modes and new bodywork. A retuned engine which now produces a claimed 189 hp (141 kW) and 153.2 hp (114.2 kW) at the rear wheel, a 10 hp increase and a 14 kg (33 lb) weight reduction for a wet weight of 196 kg (433 lb). Some of the new features on the SP model are revised frame and fuel tank made of titanium and a 13:1 compression ratio Also adding an even more exotic limited production "SP2" variant with Marchesini forged wheels and with larger valves of which 500 units will be sold.
The CBR1000RR Fireblade received some electronic updates for 2019. The traction control is now separated from the wheelie control, meaning both systems can be controlled independently. The dashboard now has a three-position ‘W’ setting, alongside the Power, Engine Braking and Honda Selectable Torque Control (HSTC) traction settings. The ABS settings has also been tweaked, giving less intervention above 120 km/h (75 mph) and giving 15% more deceleration. The ride-by-wire throttle motor is also enhanced, giving the throttle plates more quick reaction to the rider's inputs.
The CBR1000RR was awarded Cycle World's International Bike of the Year for 2008-09 by the world's moto-journal communities as well as journalists. The 2009 CBR1000RR won the Best Sportbike of the Year Award in Motorcycle USA Best of 2009 Awards, having also won the over 750 cc open sportbike class in 2008. The 2012 CBR1000RR won another Cycle World shootout, as well as a Motorcycle USA best street and track comparisons.
Various teams have won the Suzuka 8 Hours endurance race nine times between 2004 and 2014.
The photo 2008-Honda-CBR1000RR-331496-GP.jpg (2008 Honda CBR1000RR - Uploaded for: Enrico
2008 Honda CBR1000RR) was uploaded by: [email protected]
Please note, we do not have accessories, motorbikes, motor cycles, motorcycles, or motorcycle gear for sale. This site is dedicated to displaying bike images of Aprilia, Bimota, Harley Davidson, Honda, Kawasaki, Suzuki, Triumph, Yamaha, and other sportbikes.